--- /dev/null
+#!/bin/sh
+#
+# pg_upgrade: update a database without needing a full dump/reload cycle.
+# CAUTION: Read the manual page before trying to use this!
+
+# $Header: /cvsroot/pgsql/contrib/pg_upgrade/Attic/pg_upgrade,v 1.1 2002/01/14 17:32:07 momjian Exp $
+#
+# NOTE: we must be sure to update the version-checking code a few dozen lines
+# below for each new PostgreSQL release.
+
+#set -x
+
+# Set this to "Y" to enable this program
+ENABLE="N"
+
+if [ "$ENABLE" != "Y" ]
+then
+ echo "Sorry, $0 cannot upgrade database
+version $SRC_VERSION to $DST_VERSION." 1>&2
+ echo "The on-disk structure of tables has changed." 1>&2
+ echo "You will need to dump and restore using pg_dumpall." 1>&2
+ exit 1
+fi
+
+
+# UPGRADE_VERSION is the expected old database version
+UPGRADE_VERSION="7.1"
+CUR_VERSION="7.2"
+
+trap "rm -f /tmp/$$.*" 0 1 2 3 15
+
+PHASE=""
+if [ "$#" -eq 1 ]
+then
+ if [ "X$1" = "X-1" ]
+ then PHASE="1"
+ shift
+ elif [ "X$1" = "X-2" ]
+ then PHASE="2"
+ shift
+ fi
+fi
+
+if [ "$PHASE" = "" ]
+then echo "You must run $0 in either mode 1 or mode 2." 1>&2
+ echo "Usage: $0 [ -1 | -2 ]" 1>&2
+ exit 1
+fi
+
+if [ ! -e data ]
+then echo "$0 must be run from the directory above your /data directory.
+$0 aborted." 1>&2
+ if [ "$PHASE" -eq 2 ]
+ then echo "You must run initdb to create a template1 database." 1>&2
+ fi
+ exit 1
+fi
+
+INFODIR="pg_upgrade_info"
+OLDDIR="$INFODIR/data"
+
+make_dbobjoidmap()
+{
+ psql -d template1 -At -c "SELECT datname FROM pg_database" |
+ grep -v '^template0$' |
+ while read DB
+ do
+ QUERY="`echo \" SELECT relname, oid
+ FROM pg_class
+ WHERE relkind = 'r' OR
+ relkind = 'i' OR
+ relkind = 't'\"`"
+ # Don't move over 7.1 int4 sequences; use setval() file.
+ # Sequence XIDs changed from 7.2beta4 to beta5; don't copy them.
+ if [ "$SRC_VERSION" != "7.1" -a \
+ "$SRC_VERSION" != "7.2" ]
+ then QUERY="$QUERY OR relkind = 'S';";
+ QUERY="$QUERY;"
+ fi
+
+ psql -d "$DB" -At -F' ' -c "$QUERY" |
+ while read RELNAME_OID
+ do
+ echo "$DB $RELNAME_OID"
+ done
+ done
+}
+
+
+make_dboidmap()
+{
+ psql -d template1 -At -F' ' -c \
+ 'SELECT datname, oid FROM pg_database;' |
+ grep -v '^template0$'
+}
+
+
+move_objfiles()
+{
+ # Test to make sure there is a matching file in each place
+
+ if [ ! -e "$OLDDIR"/base/"$SRC_DBOID"/"$SRC_OID" ]
+ then echo "Move of database $DB, OID $SRC_OID, object $OBJ failed.
+File not found; exiting" 1>&2
+ exit 1
+ fi
+
+ if [ ! -e data/base/"$DST_DBOID"/"$DST_OID" ]
+ then echo "Move of database $DB, OID $DST_OID, object $OBJ failed.
+File not found; exiting" 1>&2
+ exit 1
+ fi
+
+ # Move files
+
+ mv -f "$OLDDIR"/base/"$SRC_DBOID"/"$SRC_OID" data/base/"$DST_DBOID"/"$DST_OID"
+ if [ "$?" -ne 0 ]
+ then echo "Move of database $DB, OID $SRC_OID, object $OBJ
+to $DST_OID failed.; exiting" 1>&2
+ exit 1
+ fi
+
+ # handle table extents
+
+ ls "$OLDDIR"/base/"$SRC_DBOID"/"$SRC_OID".* 2>/dev/null | while read FILE
+ do
+ EXT=`basename "$FILE" | sed 's/^.*\.\(.*\)$/\1/'`
+ mv -f "$FILE" data/base/"$DST_DBOID"/"$DST_OID"."$EXT"
+ if [ "$?" -ne 0 ]
+ then echo "Move of database $DB, OID $SRC_OID, object $OBJ
+to $DST_OID failed.; exiting" 1>&2
+ exit 1
+ fi
+ done
+}
+
+if [ "$PHASE" -eq 1 ]
+then
+
+ ##########################
+ # Phase 1 starts here #
+ ##########################
+
+
+ if [ ! -d data/base/1 ]
+ then echo "There is no database template1 in data/base." 1>&2
+ exit 1
+ fi
+
+ # get version
+ SRC_VERSION="`cat data/PG_VERSION`"
+ if [ "$SRC_VERSION" = "" ]
+ then echo "$0 can not find PostgreSQL version file 'data/PG_VERSION'.
+$0 aborted." 1>&2
+ exit 1
+ fi
+
+ if [ "$SRC_VERSION" != "$CUR_VERSION" -a \
+ "$SRC_VERSION" != "$UPGRADE_VERSION" ]
+ then echo
+ "$0 supports versions $UPGRADE_VERSION and $CUR_VERSION only." 1>&2
+ echo
+ "However, your database is version $SRC_VERSION;
+$0 aborted." 1>&2
+ echo "You will need to dump and restore using pg_dumpall." 1>&2
+ exit 1
+ fi
+
+ # Start server, if needed, so we can do some work.
+ if ! pg_ctl status | head -1 | grep -q "is running"
+ then pg_ctl -w start
+ if [ $? -ne 0 ]
+ then echo "Can not start server.
+$0 aborted." 1>&2
+ exit 1
+ fi
+ fi
+
+ # create directory for our data
+ rm -rf "$INFODIR"
+ mkdir "$INFODIR"
+ chmod og-rwx "$INFODIR"
+
+ # Dump schema
+ pg_dumpall -s |
+ awk -F' *' '
+ {
+ # Modify sequences with int8 maximums if we are upgrading from 7.1.
+ if ("'"$SRC_VERSION"'" == "7.1" &&
+ $1 == "CREATE" &&
+ $2 == "SEQUENCE" &&
+ # handle OS rounding
+ $9 >= 2147483646 &&
+ $9 <= 2147483648)
+ {
+ for(i=1; i <= NF; i++)
+ {
+ if (i != 9)
+ printf "%s ", $i;
+ else
+ printf "%s ", "9223372036854775807";
+ }
+ print "";
+ }
+ else print $0;
+ }' > "$INFODIR"/schema
+ if [ $? -ne 0 ]
+ then echo "Can not dump schema.
+$0 aborted." 1>&2
+ exit 1
+ fi
+
+ # Generate mappings for database
+ make_dboidmap > "$INFODIR"/dboidmap
+ make_dbobjoidmap > "$INFODIR"/dbobjoidmap
+
+ # Generate setval() script for 7.1 because it has int4 sequences
+ # Sequence XIDs changed from 7.2beta4 to beta5; we have to recreate them.
+ if [ "$SRC_VERSION" = "7.1" -o \
+ "$SRC_VERSION" = "7.2" ]
+ then
+ psql -d template1 -At -c "SELECT datname FROM pg_database" |
+ grep -v '^template0$' |
+ while read DB
+ do
+ # We use awk as a portable way to output a backslash
+ awk 'BEGIN {print "\\connect '"$DB"'"}'
+ psql -d "$DB" -At -c "
+ SELECT relname
+ FROM pg_class
+ WHERE relkind = 'S';" |
+ while read SEQUENCE
+ do
+ VALUE=`psql -d "$DB" -At -c "SELECT last_value
+ FROM \"$SEQUENCE\";"`
+ echo "SELECT setval ('$SEQUENCE', $VALUE, true);"
+ done
+ done > "$INFODIR"/setval
+ else rm -f "$INFODIR"/setval
+ fi
+
+ # Vacuum all databases to remove exipired rows.
+ # We will lose our transaction log file during the upgrade so we
+ # have to do this.
+
+ vacuumdb -a
+ if [ $? -ne 0 ]
+ then echo "Can not vacuum server.
+$0 aborted." 1>&2
+ exit 1
+ fi
+
+ # Stop server so we can move the directory.
+ pg_ctl -w stop
+ if [ $? -ne 0 ]
+ then echo "Can not stop server.
+$0 aborted." 1>&2
+ exit 1
+ fi
+
+ mv data "$INFODIR"
+ if [ $? -ne 0 ]
+ then echo "Can not move old /data out of the way.
+$0 aborted." 1>&2
+ exit 1
+ fi
+ echo
+ echo
+ echo "Plase 1 completed.
+Continue with the steps outlined in the $0 manual page."
+ exit 0
+fi
+
+
+ ##########################
+ # Phase 2 starts here #
+ ##########################
+
+# check things
+
+if [ ! -d "$INFODIR" ]
+then echo "There is no '$INFODIR' directory from a phase 1 run of $0." 1>&2
+ exit 1
+fi
+
+if [ ! -e "$OLDDIR" ]
+then echo "There is no '$OLDDIR' directory from the phase 1 run of $0." 1>&2
+ exit 1
+fi
+
+if [ ! -f "$OLDDIR/PG_VERSION" ]
+then echo "Cannot read '$OLDDIR/PG_VERSION' --- something is wrong." 1>&2
+ exit 1
+fi
+
+if [ ! -f "data/PG_VERSION" ]
+then echo "Cannot read 'data/PG_VERSION' --- something is wrong." 1>&2
+ exit 1
+fi
+
+if [ ! -d "data/base/1" ]
+then echo "Cannot find database template1 in 'data/base'." 1>&2
+ echo "Are you running $0 as the postgres superuser?" 1>&2
+ exit 1
+fi
+
+# Get the actual versions seen in the data dirs.
+
+SRC_VERSION=`cat "$OLDDIR"/PG_VERSION`
+DST_VERSION=`cat data/PG_VERSION`
+
+# Check for version compatibility.
+# This code will need to be updated/reviewed for each new PostgreSQL release.
+
+if [ "$DST_VERSION" != "$CUR_VERSION" ]
+then echo "$0 is for PostgreSQL version $CUR_VERSION
+but data/PG_VERSION contains $DST_VERSION." 1>&2
+ echo "Did you run initdb for version $UPGRADE_VERSION by mistake?" 1>&2
+ exit 1
+fi
+
+# Stop server for pg_resetxlog use
+
+if pg_ctl status | head -1 | grep -q "is running"
+then pg_ctl -w stop
+ if [ $? -ne 0 ]
+ then echo "Can no start server.
+$0 aborted." 1>&2
+ exit 1
+ fi
+fi
+
+# check for proper pg_resetxlog version
+
+pg_resetxlog 2>/dev/null
+# file not found status is normally 127, not 1
+if [ "$?" -ne 1 ]
+then echo "Unable to find pg_resetxlog in path.
+Install it from pgsql/contrib/pg_resetxlog and continue.; exiting" 1>&2
+ exit 1
+fi
+
+if ! pg_resetxlog -x 2>&1 | grep -q 'xid'
+then echo "Old version of pg_resetxlog found in path.
+Install a newer version from pgsql/contrib/pg_resetxlog.; exiting" 1>&2
+ exit 1
+fi
+
+# If the XID is > 2 billion, 7.1 database will have non-frozen XID's in
+# low numbers, and 7.2 will think they are in the future --- bad.
+
+SRC_XID=`pg_resetxlog -n "$OLDDIR" | grep "NextXID" | awk -F' *' '{print $4}'`
+if [ "$SRC_VERSION" = "7.1" -a "$SRC_XID" -gt 2000000000 ]
+then echo "XID too high for $0.; exiting" 1>&2
+ exit 1
+fi
+DST_XID=`pg_resetxlog -n data | grep "NextXID" | awk -F' *' '{print $4}'`
+
+# compare locales to make sure they match
+
+pg_resetxlog -n "$OLDDIR" | grep "^LC_" > /tmp/$$.0
+pg_resetxlog -n data | grep "^LC_" > /tmp/$$.1
+if ! diff /tmp/$$.0 /tmp/$$.1 >/dev/null
+then echo "Locales do not match between the two versions.; exiting" 1>&2
+ exit 1
+fi
+
+# Restart postmaster
+
+pg_ctl -w start
+if [ $? -ne 0 ]
+then echo "Can not start server.
+$0 aborted." 1>&2
+ exit 1
+fi
+
+
+###################################
+# Checking done. Ready to proceed.
+###################################
+
+
+# Execute the schema script to create everything
+
+psql template1 < "$INFODIR"/schema
+if [ $? -ne 0 ]
+then echo "There were errors in the input script.
+$0 aborted." 1>&2
+ exit 1
+fi
+
+echo "Input script complete, fixing row commit statuses..."
+
+# XXX do we still need this?
+# Now vacuum each result database because our movement of transaction log
+# causes some committed transactions to appear as non-committed
+
+vacuumdb -a
+if [ $? -ne 0 ]
+then echo "There were errors during VACUUM.
+$0 aborted." 1>&2
+ exit 1
+fi
+
+# Generate mappings for database
+make_dboidmap > /tmp/$$.dboidmap
+make_dbobjoidmap > /tmp/$$.dbobjoidmap
+
+# we are done with SQL database access
+# shutdown forces buffers to disk
+
+pg_ctl -w stop
+if [ "$?" -ne 0 ]
+then echo "Unable to stop database server.; exiting" 1>&2
+ exit 1
+fi
+
+echo "Commit fixes complete, moving data files..."
+
+# Move table/index/sequence files
+
+cat "$INFODIR"/dbobjoidmap | while read LINE
+do
+ DB=`echo "$LINE" | awk '{print $1}'`
+ OBJ=`echo "$LINE" | awk '{print $2}'`
+
+ # Skip system tables, except for pg_largeobject
+ # pg_toast tables are handled later as part of the
+ # base table move
+ if [ `expr "$OBJ" : 'pg_'` -eq 3 -a \
+ `expr "$OBJ" : 'pg_largeobject'` -ne 14 ]
+ then continue
+ fi
+
+ SRC_OID=`echo "$LINE" | awk '{print $3}'`
+ SRC_DBOID=`grep "^$DB " "$INFODIR"/dboidmap | awk '{print $2}'`
+ DST_DBOID=`grep "^$DB " /tmp/$$.dboidmap | awk '{print $2}'`
+ DST_OID=`grep "^$DB $OBJ " /tmp/$$.dbobjoidmap | awk '{print $3}'`
+
+ move_objfiles
+
+ # Handle TOAST files if they exist
+ if grep -q "^$DB pg_toast_$SRC_OID " "$INFODIR"/dbobjoidmap
+ then # toast heap
+ SAVE_SRC_OID="$SRC_OID"
+ SAVE_DST_OID="$DST_OID"
+ SRC_OID=`grep "^$DB pg_toast_$SAVE_SRC_OID " \
+ "$INFODIR"/dbobjoidmap | awk '{print $3}'`
+ DST_OID=`grep "^$DB pg_toast_$SAVE_DST_OID " \
+ /tmp/$$.dbobjoidmap | awk '{print $3}'`
+ move_objfiles
+ # toast index
+ SRC_OID=`grep "^$DB pg_toast_${SAVE_SRC_OID}_idx " \
+ "$INFODIR"/dbobjoidmap | awk '{print $3}'`
+ DST_OID=`grep "^$DB pg_toast_${SAVE_DST_OID}_idx " \
+ /tmp/$$.dbobjoidmap | awk '{print $3}'`
+ move_objfiles
+ fi
+done
+
+
+# Set this so future backends don't think these tuples are their own
+# because it matches their own XID.
+# Commit status already updated by vacuum above
+# Set to maximum XID just in case SRC wrapped around recently and
+# is lower than DST's database
+
+if [ "$SRC_XID" -gt "$DST_XID" ]
+then MAX_XID="$SRC_XID"
+else MAX_XID="$DST_XID"
+fi
+
+pg_resetxlog -x "$MAX_XID" data
+if [ "$?" -ne 0 ]
+then echo "Unable to set new XID.; exiting" 1>&2
+ exit 1
+fi
+
+# Move over old WAL
+
+rm -r data/pg_xlog
+mv -f "$OLDDIR"/pg_xlog data
+
+# Set last log file id and segment from old database
+
+LOG_ID=`pg_resetxlog -n "$OLDDIR" | grep "Current log file id:" |
+ awk -F' *' '{print $5}'`
+if [ "$LOG_ID" = "" ]
+then echo "Unable to get old log file id.; exiting" 1>&2
+ exit 1
+fi
+SEG_ID=`pg_resetxlog -n "$OLDDIR" | grep "Next log file segment:" |
+ awk -F' *' '{print $5}'`
+if [ "$SEG_ID" = "" ]
+then echo "Unable to get old log segment id.; exiting" 1>&2
+ exit 1
+fi
+
+# Set checkpoint location of new database
+
+pg_resetxlog -l "$LOG_ID" "$SEG_ID" data
+if [ "$?" -ne 0 ]
+then echo "Unable to set new log file/segment id.; exiting" 1>&2
+ exit 1
+fi
+
+# Restart server with moved data
+
+pg_ctl -w start
+if [ "$?" -ne 0 ]
+then echo "Unable to restart database server.; exiting" 1>&2
+ exit 1
+fi
+
+# Set sequence values for 7.1-version sequences, which were int4.
+
+if [ "$SRC_VERSION" = "7.1" -o \
+ "$SRC_VERSION" = "7.2" ]
+then echo "Set sequence values..."
+ psql -d template1 -At < "$INFODIR"/setval
+ if [ $? -ne 0 ]
+ then echo "There were errors during int4 sequence restore.
+$0 aborted." 1>&2
+ exit 1
+ fi
+fi
+
+echo
+echo
+echo "You may remove the old database files with 'rm -r pg_upgrade'."
+
+exit 0
+++ /dev/null
-
-
-
-
-
-
- 1
- Application
-
-
-
-
-
- Allows upgrade from a previous release without reloading data
-
-
-
-
- 1999-07-31
-
-
- pg_upgrade
-
-
-
-
-
- 1999-07-31
-
-
</div>
<div class="diff rem">- Description</div>
<div class="diff rem">-
-
- is a utility for upgrading from a previous
-
PostgreSQL release without reloading all the data.
- Not all
PostgreSQL release transitions can be
- handled this way. Check the release notes for details on your installation.
-
-
-
Upgrading <productname>PostgreSQL</productname> with pg_upgrade
-
-
- Back up your existing data directory, preferably by making a
- complete dump with pg_dumpall.
-
-
-
-
- Copy the program pgsql/src/bin/pg_dump/pg_upgrade
- from the current PostgreSQL distribution into somewhere in your path.
-
-
-
-
- Change your working directory to the
- pgsql main directory, and type:
-$ pg_upgrade -1
-
- to collect information about the old database needed for the
- upgrade.
-
-
-
-
- Do:
-$ make install
-
- to install the new binaries.
-
-
-
-
- Do:
-$ cd pgsql/contrib/pg_resetxlog
-$ make install
-
- to install the /contrib/pg_resetxlog utility
- which will be used by pg_upgrade.
-
-
-
-
- Run
initdb to create a new template1 database
- containing the system tables for the new release. Make sure you use
- settings similar to those used in your previous version.
-
-
-
-
- Start the new postmaster. (Note: it is critical that no users connect
- to the server until the upgrade is complete. You may wish to start
- the postmaster without -i and/or alter pg_hba.conf
- temporarily.)
-
-
-
-
- Change your working directory to the
- pgsql main directory, and type:
-$ pg_upgrade -2
-
- The program will do some checking to make sure everything is properly
- configured, and will run your db.out script to recreate all the databases
- and tables you had, but with no data. It will then physically move the
- data files containing non-system tables and indexes from
- data.old/ into the proper
- data/ subdirectories, replacing the empty data files
- created during the db.out script.
-
-
-
-
- Restore your old pg_hba.conf if needed to allow
- user logins.
-
-
-
-
- Carefully examine the contents of the upgraded
- databases. If you detect problems, you'll need to recover by restoring
- from your full pg_dump backup.
- You can delete the data.old/ directory when you
- are satisfied.
-
-
-
-
- The upgraded databases will be in an un-vacuumed state. You will probably
- want to run a VACUUM ANALYZE before beginning
- production work.
-
-
-
-
-
-
-
projects / postgresql.git / commitdiff