New recovery target recovery_target_lsn

Michael Paquier

diff --git a/doc/src/sgml/recovery-config.sgml b/doc/src/sgml/recovery-config.sgml
index 26af221745cc294fbe13df8795a62856fc92f4a3..de3fb10f5bed8992c2aae6437ce4e282b9428f9e 100644 (file)
--- a/doc/src/sgml/recovery-config.sgml
+++ b/doc/src/sgml/recovery-config.sgml
@@ -157,9 +157,10 @@ restore_command = 'copy "C:\\server\\archivedir\\%f" "%p"'  # Windows
       By default, recovery will recover to the end of the WAL log. The
       following parameters can be used to specify an earlier stopping point.
       At most one of recovery_target,
-      recovery_target_name, recovery_target_time, or
-      recovery_target_xid can be used; if more than one of these
-      is specified in the configuration file, the last entry will be used.
+      recovery_target_lsn, recovery_target_name,
+      recovery_target_time, or recovery_target_xid
+      can be used; if more than one of these is specified in the configuration
+      file, the last entry will be used.
      
 
      
@@ -232,6 +233,23 @@ restore_command = 'copy "C:\\server\\archivedir\\%f" "%p"'  # Windows
        
       
      
+
+     
+      recovery_target_lsn (pg_lsn)
+      
+        recovery_target_lsn recovery parameter
+      
+      
+      
+       
+        This parameter specifies the LSN of the transaction log location up
+        to which recovery will proceed. The precise stopping point is also
+        influenced by . This
+        parameter is parsed using the system data type
+        pg_lsn.
+       
+      
+     
      
 
      

diff --git a/src/backend/access/transam/recovery.conf.sample b/src/backend/access/transam/recovery.conf.sample
index b777400d0344d81257f341060c5d6fe24e97d2f9..7a16751541c31e2b7a84dc1eab64c87b5cf1dc9c 100644 (file)
--- a/src/backend/access/transam/recovery.conf.sample
+++ b/src/backend/access/transam/recovery.conf.sample
@@ -67,8 +67,8 @@
 # must set a recovery target.
 #
 # You may set a recovery target either by transactionId, by name,
-# or by timestamp. Recovery may either include or exclude the
-# transaction(s) with the recovery target value (ie, stop either
+# by timestamp or by WAL position (LSN). Recovery may either include or
+# exclude the transaction(s) with the recovery target value (ie, stop either
 # just after or just before the given target, respectively).
 #
 #
@@ -78,6 +78,8 @@
 #
 #recovery_target_xid = ''
 #
+#recovery_target_lsn = ''  # e.g. '0/70006B8'
+#
 #recovery_target_inclusive = true
 #
 #

diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c
index 0b991bb91debbee4a6a336435999ebf54e4e0ec8..2189c22c649314fb3739cf8dc2da590377251321 100644 (file)
--- a/src/backend/access/transam/xlog.c
+++ b/src/backend/access/transam/xlog.c
@@ -67,6 +67,7 @@
 #include "utils/builtins.h"
 #include "utils/guc.h"
 #include "utils/memutils.h"
+#include "utils/pg_lsn.h"
 #include "utils/ps_status.h"
 #include "utils/relmapper.h"
 #include "utils/snapmgr.h"
@@ -254,6 +255,7 @@ static RecoveryTargetAction recoveryTargetAction = RECOVERY_TARGET_ACTION_PAUSE;
 static TransactionId recoveryTargetXid;
 static TimestampTz recoveryTargetTime;
 static char *recoveryTargetName;
+static XLogRecPtr recoveryTargetLSN;
 static int recovery_min_apply_delay = 0;
 static TimestampTz recoveryDelayUntilTime;
 
@@ -275,6 +277,7 @@ static bool fast_promote = false;
  */
 static TransactionId recoveryStopXid;
 static TimestampTz recoveryStopTime;
+static XLogRecPtr recoveryStopLSN;
 static char recoveryStopName[MAXFNAMELEN];
 static bool recoveryStopAfter;
 
@@ -5078,6 +5081,23 @@ readRecoveryCommandFile(void)
                    (errmsg_internal("recovery_target_name = '%s'",
                                     recoveryTargetName)));
        }
+       else if (strcmp(item->name, "recovery_target_lsn") == 0)
+       {
+           recoveryTarget = RECOVERY_TARGET_LSN;
+
+           /*
+            * Convert the LSN string given by the user to XLogRecPtr form.
+            */
+           recoveryTargetLSN =
+               DatumGetLSN(DirectFunctionCall3(pg_lsn_in,
+                                               CStringGetDatum(item->value),
+                                               ObjectIdGetDatum(InvalidOid),
+                                                       Int32GetDatum(-1)));
+           ereport(DEBUG2,
+                   (errmsg_internal("recovery_target_lsn = '%X/%X'",
+                                    (uint32) (recoveryTargetLSN >> 32),
+                                    (uint32) recoveryTargetLSN)));
+       }
        else if (strcmp(item->name, "recovery_target") == 0)
        {
            if (strcmp(item->value, "immediate") == 0)
@@ -5400,8 +5420,26 @@ recoveryStopsBefore(XLogReaderState *record)
 
        recoveryStopAfter = false;
        recoveryStopXid = InvalidTransactionId;
+       recoveryStopLSN = InvalidXLogRecPtr;
+       recoveryStopTime = 0;
+       recoveryStopName[0] = '\0';
+       return true;
+   }
+
+   /* Check if target LSN has been reached */
+   if (recoveryTarget == RECOVERY_TARGET_LSN &&
+       !recoveryTargetInclusive &&
+       record->ReadRecPtr >= recoveryTargetLSN)
+   {
+       recoveryStopAfter = false;
+       recoveryStopXid = InvalidTransactionId;
+       recoveryStopLSN = record->ReadRecPtr;
        recoveryStopTime = 0;
        recoveryStopName[0] = '\0';
+       ereport(LOG,
+               (errmsg("recovery stopping before WAL position (LSN) \"%X/%X\"",
+                       (uint32) (recoveryStopLSN >> 32),
+                       (uint32) recoveryStopLSN)));
        return true;
    }
 
@@ -5479,6 +5517,7 @@ recoveryStopsBefore(XLogReaderState *record)
        recoveryStopAfter = false;
        recoveryStopXid = recordXid;
        recoveryStopTime = recordXtime;
+       recoveryStopLSN = InvalidXLogRecPtr;
        recoveryStopName[0] = '\0';
 
        if (isCommit)
@@ -5532,6 +5571,7 @@ recoveryStopsAfter(XLogReaderState *record)
        {
            recoveryStopAfter = true;
            recoveryStopXid = InvalidTransactionId;
+           recoveryStopLSN = InvalidXLogRecPtr;
            (void) getRecordTimestamp(record, &recoveryStopTime);
            strlcpy(recoveryStopName, recordRestorePointData->rp_name, MAXFNAMELEN);
 
@@ -5543,6 +5583,23 @@ recoveryStopsAfter(XLogReaderState *record)
        }
    }
 
+   /* Check if the target LSN has been reached */
+   if (recoveryTarget == RECOVERY_TARGET_LSN &&
+       recoveryTargetInclusive &&
+       record->ReadRecPtr >= recoveryTargetLSN)
+   {
+       recoveryStopAfter = true;
+       recoveryStopXid = InvalidTransactionId;
+       recoveryStopLSN = record->ReadRecPtr;
+       recoveryStopTime = 0;
+       recoveryStopName[0] = '\0';
+       ereport(LOG,
+               (errmsg("recovery stopping after WAL position (LSN) \"%X/%X\"",
+                       (uint32) (recoveryStopLSN >> 32),
+                       (uint32) recoveryStopLSN)));
+       return true;
+   }
+
    if (rmid != RM_XACT_ID)
        return false;
 
@@ -5598,6 +5655,7 @@ recoveryStopsAfter(XLogReaderState *record)
            recoveryStopAfter = true;
            recoveryStopXid = recordXid;
            recoveryStopTime = recordXtime;
+           recoveryStopLSN = InvalidXLogRecPtr;
            recoveryStopName[0] = '\0';
 
            if (xact_info == XLOG_XACT_COMMIT ||
@@ -5629,6 +5687,7 @@ recoveryStopsAfter(XLogReaderState *record)
        recoveryStopAfter = true;
        recoveryStopXid = InvalidTransactionId;
        recoveryStopTime = 0;
+       recoveryStopLSN = InvalidXLogRecPtr;
        recoveryStopName[0] = '\0';
        return true;
    }
@@ -6055,6 +6114,11 @@ StartupXLOG(void)
            ereport(LOG,
                    (errmsg("starting point-in-time recovery to \"%s\"",
                            recoveryTargetName)));
+       else if (recoveryTarget == RECOVERY_TARGET_LSN)
+           ereport(LOG,
+                   (errmsg("starting point-in-time recovery to WAL position (LSN) \"%X/%X\"",
+                           (uint32) (recoveryTargetLSN >> 32),
+                           (uint32) recoveryTargetLSN)));
        else if (recoveryTarget == RECOVERY_TARGET_IMMEDIATE)
            ereport(LOG,
                    (errmsg("starting point-in-time recovery to earliest consistent point")));
@@ -7124,6 +7188,12 @@ StartupXLOG(void)
                     "%s %s\n",
                     recoveryStopAfter ? "after" : "before",
                     timestamptz_to_str(recoveryStopTime));
+       else if (recoveryTarget == RECOVERY_TARGET_LSN)
+           snprintf(reason, sizeof(reason),
+                    "%s LSN %X/%X\n",
+                    recoveryStopAfter ? "after" : "before",
+                    (uint32 ) (recoveryStopLSN >> 32),
+                    (uint32) recoveryStopLSN);
        else if (recoveryTarget == RECOVERY_TARGET_NAME)
            snprintf(reason, sizeof(reason),
                     "at restore point \"%s\"",

diff --git a/src/include/access/xlog.h b/src/include/access/xlog.h
index 14b7f7f459a98b8d57def2e96147a266728ab09b..c9f332c908f35c02c0a2e8a8ea857fce25af54f7 100644 (file)
--- a/src/include/access/xlog.h
+++ b/src/include/access/xlog.h
@@ -83,6 +83,7 @@ typedef enum
    RECOVERY_TARGET_XID,
    RECOVERY_TARGET_TIME,
    RECOVERY_TARGET_NAME,
+   RECOVERY_TARGET_LSN,
    RECOVERY_TARGET_IMMEDIATE
 } RecoveryTargetType;
 

diff --git a/src/test/recovery/t/003_recovery_targets.pl b/src/test/recovery/t/003_recovery_targets.pl
index d1f6d78388b4125d887e289dc8dfc80228f993ba..a82545bf6fc965f22158afcc7c3c1107135c52c7 100644 (file)
--- a/src/test/recovery/t/003_recovery_targets.pl
+++ b/src/test/recovery/t/003_recovery_targets.pl
@@ -3,7 +3,7 @@ use strict;
 use warnings;
 use PostgresNode;
 use TestLib;
-use Test::More tests => 7;
+use Test::More tests => 9;
 
 # Create and test a standby from given backup, with a certain
 # recovery target.
@@ -86,6 +86,16 @@ my $lsn4 =
 $node_master->safe_psql('postgres',
    "SELECT pg_create_restore_point('$recovery_name');");
 
+# And now for a recovery target LSN
+$node_master->safe_psql('postgres',
+   "INSERT INTO tab_int VALUES (generate_series(4001,5000))");
+my $recovery_lsn = $node_master->safe_psql('postgres', "SELECT pg_current_xlog_location()");
+my $lsn5 =
+  $node_master->safe_psql('postgres', "SELECT pg_current_xlog_location();");
+
+$node_master->safe_psql('postgres',
+   "INSERT INTO tab_int VALUES (generate_series(5001,6000))");
+
 # Force archiving of WAL file
 $node_master->safe_psql('postgres', "SELECT pg_switch_xlog()");
 
@@ -102,6 +112,9 @@ test_recovery_standby('time', 'standby_3', $node_master, \@recovery_params,
 @recovery_params = ("recovery_target_name = '$recovery_name'");
 test_recovery_standby('name', 'standby_4', $node_master, \@recovery_params,
    "4000", $lsn4);
+@recovery_params = ("recovery_target_lsn = '$recovery_lsn'");
+test_recovery_standby('LSN', 'standby_5', $node_master, \@recovery_params,
+   "5000", $lsn5);
 
 # Multiple targets
 # Last entry has priority (note that an array respects the order of items
@@ -111,16 +124,23 @@ test_recovery_standby('name', 'standby_4', $node_master, \@recovery_params,
    "recovery_target_xid  = '$recovery_txid'",
    "recovery_target_time = '$recovery_time'");
 test_recovery_standby('name + XID + time',
-   'standby_5', $node_master, \@recovery_params, "3000", $lsn3);
+   'standby_6', $node_master, \@recovery_params, "3000", $lsn3);
 @recovery_params = (
    "recovery_target_time = '$recovery_time'",
    "recovery_target_name = '$recovery_name'",
    "recovery_target_xid  = '$recovery_txid'");
 test_recovery_standby('time + name + XID',
-   'standby_6', $node_master, \@recovery_params, "2000", $lsn2);
+   'standby_7', $node_master, \@recovery_params, "2000", $lsn2);
 @recovery_params = (
    "recovery_target_xid  = '$recovery_txid'",
    "recovery_target_time = '$recovery_time'",
    "recovery_target_name = '$recovery_name'");
 test_recovery_standby('XID + time + name',
-   'standby_7', $node_master, \@recovery_params, "4000", $lsn4);
+   'standby_8', $node_master, \@recovery_params, "4000", $lsn4);
+@recovery_params = (
+   "recovery_target_xid  = '$recovery_txid'",
+   "recovery_target_time = '$recovery_time'",
+   "recovery_target_name = '$recovery_name'",
+   "recovery_target_lsn = '$recovery_lsn'",);
+test_recovery_standby('XID + time + name + LSN',
+   'standby_9', $node_master, \@recovery_params, "5000", $lsn5);